This content is brought to you by Audiocourses dot com
As a Hip Hop Producer, one thing you must learn to respect is the power of bass and how it can control your entire mix for better or worse.
So, for the benefit of your mixes, take note of these important tricks of the trade we reveal
below:
1) Bass frequencies are omnidirectional. This means the lows within bass instruments
contain alot of power and energy, so powerful they can control the overall output
of the master mix level. Plus, your bass track should almost always be panned
in the center. Panning your bass other than to the center is senseless as it
will only generate a mix that is lopsided and artificially hot on one side.
2) Don't EQ your bass with the same frequencies as you used on your kicks.
For example, if you boosted 40-80hz in your kick tracks, then boost around 120hz
for your bass, or vice versa. It's very important to avoid accumulation of the
same frequencies when dealing with lows as these tracks control the overall
output level of your mix. By assigning different frequency settings to each
low end track, your overall mix level can become louder.
3) Boosting a particular frequency on a kick track, calls for cutting the same
frequency by the same amount on your bass track. Specifically, when boosting
80hz on a kick track, be certain to cut 80hz by the same amount on your bass
track. Likewise, if you boosted 130hz on your bass track, cut by the same amount
and frequency on your kick track. This secret technique will give your song
a far more low end sculpted sound, allowing for a hotter overall mix.
ModernBeats - Modern Toolz 4 Hip Hop Production
Related: Hip Hop Rap Music Production
