This content is brought to you by Audiocourses dot com
JESSUP, MARYLAND: Essentially a mini API console in a convenient, 19-inch studio rack with roll-around casters, the new DSM (that's Discrete Summing Mixer) workstation monitor rack is specifically designed to compliment any digital audio workstation by providing professional analog summing, mixing, control room switching/monitoring, patchbay facilities, and studio I/O connections. The DSM answers the requests of many DAW users who have always loved the sound of API consoles, but found it not always possible to mix their projects on large API boards.
API engineer, Jeff Bork, says: "The DSM is for someone who is looking to get
rid of the computer processing load it takes to do digital summing and its
negative effect on the operation of their DAW software, while getting the
great sound of API summing amps at the same time." The DSM is loaded with
all API equipment, with 2520 discrete op amp modules used throughout.
The genesis of the DSM line started two years ago with the introduction of
the API 7600 discrete four-buss channel strip that combined an API 212L
microphone pre-amp, 550A equalizer, and 225L compressor. The 7600 recording
channel has four buss output paths, complete LED metering, four aux send
outputs, solo, mute and polarity switches.
With the 7600, 'an API console strip' in a 1U rack space, the 7800 discrete
four-buss console master was developed to enable linking any number of 7600s
together for multi-track recording, control and routing. Bork comments: "The
7800 Master is very heavy with a lot of transformers and twelve 2520s to
handle four sends, four busses, and stereo pre/post fader paths." The 7800
will control, sum and interface the 7600 or the new 8200 units in any
combination or number.
All the pieces of the DSM fell together with the introduction of the
single-rack space 8200/8200A discrete eight-channel summing mixer. The 8200
makes it possible to mix eight mono (or four stereo) stems from a DAW down
to stereo. Like the single recording channel 7600, the 8200 also has level
and pan controls, as well as both mute and solo buttons - a complete 8X2
line level mixer in 1U.
The three new API DSM products are the DSM 24, DSM 48, and DSM 72. Each is
ready to go work with DAWs that have 24, 48 and 72 output channels
respectively. All three versions consist of the core elements outlined
below.
At the top of the DSM rack is a two-rack space meter bridge panel for
monitoring the stereo buss level and individual LED trees for the four
recording busses and four auxiliary sends. Complete with a built-in talkback
mic, it uses the same meters as the API Legacy and Vision consoles.
Below the meter is the popular API 2500 discrete two-channel stereo buss
compressor with ATI's patented Thrust circuitry. Notable features include
selectable compression ratio; variable attack and release times; variable
link between left and right channels; choice of either old "feed back"
or
new "feed forward" compression; soft, medium or hard knee compression;
and
auto or manual gain make up.
Below the 2500 is the aforementioned 7800 discrete four-buss console master
with stereo control room/studio speakers switching and volume controls,
stereo master fader, talkback/slate facilities, buss sub-masters, aux send
masters, and solo controls.
Depending on the number of DAW output channels required for monitoring, next
comes any number of 8200 modules each with eight inputs, level and pan
controls, mute, AFL solo, aux send 1 and 2 level controls and an insert
in/out button. A DSM 72 would have nine 8200 modules. The outputs of all
8200s are routed and summed within the 7800.
The bottom of the DSM rack has a full TT patchbay for full access to all DAW
outputs and every insert point of each channel of each 8200. Below the
patchbay is the 8000-BIB buss interface panel for accessing any of the four
busses and four aux send busses in the 7800.
The DSM rack finishes with a complete set of I/O connections on the rear.
There are D-connectors (Tascam D88 standard) for DAW outputs and for the aux
sends and busses 1-4. There are also XLR connectors for three two-track tape
machines and large/small monitor speaker amps.
Noted Dan Zimbelman, director of sales, " The DSM series is application
specific. It's for users who have always wanted to mix on a discrete API
analog summing buss from their DAW. Whether its 24 channels (DSM 24), 48
channels (DSM 48) or 72 channels (DSM 72), API has cost-effectively
simplified the way to merge the digital/analog dilemma."
API remains the leader in analog recording gear, such as the ground-breaking
API Vision surround mixing console, the famed Legacy console, the TEC award-winning
7600 channel strip, the acclaimed 2500 stereo buss compressor. The ATI Group
is the parent company of Audio Toys Incorporated, API Audio and Uptown Automation.
Audio Toys manufactures the industry leading Paragon II monitor console, the
Paragon II production console and associated rack mount gear. Uptown Automation
manufactures and installs moving fader and mute automation for analog mixing
consoles.
Discrete Summing Mixer
COME VISIT US AT AES 2004 SAN FRANCISCO BOOTH #402
www.audiotoys.com www.apiaudio.com
Related: Mixing Console
Forum
